₹ 2,868.00 - ₹ 1,435.50
(as of Nov 03,2020 22:49:10 UTC – Details)
Before using for the first time, please check if the voltage rating on the type plate corresponds to the mains voltage in your home, if not, please contact with the manufacturer.Use an earthed wall socket; the cord and plug must be dry.Unfold the AC cord completely before using.Make sure to unplug the appliance from the socket when leaving the iron even for a short while, and stand the iron on its end. Please leave the iron away from the touch of children. Take care of the iron when it is on.the iron will be of high temperature when used, never touch it with hand or close to the flammable product in order to avoid the accident.Caution: Unplug the appliance from the socket before filling the iron with water or pouring out the remaining water.Never immerse the iron in water or other liquid.Please send the iron to our special repair agent for repair if any damage on cord.Deposit or mineral in the water will lead to generate the scales and block the steam hole, therefore it is advisable to use distilled water.In order to prevent overriding the circuit load, please son’t use other appliances with high power at the same line.If necessary to connect with several appliances with high power at the same line. please use the cord with 10A, otherwise the cord with less than 10A will be too heat. The cord should be placed carefully in order not to be pulled out or stumbled.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.The iron must not be left unattended while it is connected to the supply mains.The iron must be used and rested on a stable surface.When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
Cautions Of The First Use
The iron has been greased, and as a result, the iron may slightly smoke when switched on for the first time. After a short while, this will cease.Before using for the first time, remove any sticker or protective foil from the sole plate. Clean the sole plate with a soft cloth.Keep the sole plate smooth: avoid hard contact with metal objects (such as clothes rack, button and slide fastener).Pure woolen fabrics (100% wool) may be pressed with the iron set to a steam position. Preferably set the steam regulator to strong the position, and use a dry pressing cloth.
Before running the iron, please classify the clothes as per its washing label, as it will be quicker for the iron to heat up that to cool, the clothes (such as synthetic fabric, silk etc) with lower ironing temperature shall be ironed firstly, and then iron the clothes (such as wool, cotton and linen etc) with higher temperature.Stand the iron on its end, and turn the thermostat dial to the MIN position.Plug in the iron and select the temperature by turning the thermostat dial. If there is water in the reservoir, turn the steam regulator to OFF position. Wait until the indicator light goes off showing that the required temperature has been reached.
Warmex Sassy Smart & Steam Iron
This Warmex 2200 Watts Sassy Steam Iron gliding effortlessly over the garment fabric with the powerful steam output, it also features a Nano Ceramic Coated Sole Plate that glides smoothly over all types of fabrics. Self cleaning feature that lends the appliance a longer life.
Now experience precision and performance with the Sassy Iron, a compact steam iron featuring a powerful burst and variable steam that is light on you but tough on crease. This makes your ironing smoother, quicker, and hassle-free.
2200 Watts110 Gms Burst Of Steam Shot30 g Continuous Steam Rate 350 ML Transparent Water Tank, Self Cleaning, 360° Swivel Cord Movement, Over Heat Protection.Variable Thermostat Control Function Prevents Direct Heating Of Heating Element.
110 Grams Burst Of Steam Shot
This function will be able to provide more steam to remove stubborn creases.
Set the thermostat dial button to MAX until the indicator light goes off.Release the steam by pressing the steam button.Wait for several minutes and let the steam penetrate through the fabric, and then release more steam through pressing this buttons again.Note; There should be 3-5 seconds rest between two times of pressing Steam Button in order to obtain the best steaming result.Fill the water to the Max position before using this function.In order to prevent the water leaking from sole-plate, please do not press the button continuously with more than 5 seconds.
In order to remove scale and impurities, apply self-clean system once every month at least.
Fill half of the box with box. Set the steam knob to No Steam position.Plug in the iron to the socket. Set the thermostat knob dial to Max.When the pilot light goes off, i.e. the steam iron has been in its presetting temperature.Unplug the iron, and hold the appliance horizontally over a sink.Set the steam knob to position “Self-Clean”, boiling water and steam will come out from the sole-plate, shake the iron slightly in order to wash out impurities & scale.Set the steam knob to position O when no water in the box.Stand the iron on its end and plug the appliance in the socket, heat up the iron again.Move the iron over a piece of clean cotton cloth, and the remaining water in the iron will evaporate from the sole plate.
Automatic Safety Shut Off
When the iron is plugged in, the power indicator will light steadily, indicating that there is power to the iron.
If you leave the iron:
In a horizontal potion without moving it, or accidentally tip the iron over, it will automatically stop heating after 30 seconds. The auto-off indicator light will blink to let you know that the iron has stopped heating.In a vertical position (on its heel rest without moving it, the iron will automatically turn off after 8 minutes. The Auto-off indicator light will blink to let you know that the iron has stopped heating.
Fill the water in the iron as per water-filling methods.Press water spray button.
Note: No matter what steam ironing or dry ironing is, Spray will always be available in any case.
360° Swivel Cord
This steam iron has a 360° free movement swivel cord for you to move the iron effortlessly in every direction. with swivel cord for easy gliding of iron over all types of fabric. This 360° free movement avoids the possibility of tangled wires and keeps your hands and wrist stress free.
Self Clean Facility
Self-cleaning flushes out deposits from iron so vents are not clogged. Clean unit once a month to maintain its performance & life.The iron has been specially designed with self-clean ability, so it flushes out any deposits automatically, thus preventing the vents from getting clogged. This feature also promises higher efficiency and longevity.
Cleaning & Maintenance
Before cleaning, remove the plug from the socket and allow the iron to cool down sufficiently.
Wipe off the sole-plate with a damp cloth and a non-abrasive (liquid) cleaner.If the fiber is adhered to the sol-plate, use a damp cloth with vinegar to wipe off the sole-plate.Never use strong acid or alkali in order to avoid damaging the sole-plate.If the scale blocks the steam hole, please remove the scale with toothpick; do not damage the surface sole-plate.Stand the iron on its end and let it cool down sufficiently, and meantime pour any remaining water out of the box, set the steam regulator to position “O”.
Fill water in the iron as per the water-filling methods.
Plug the appliance in the socket.If only set thermostat dial to MAX position as per the temperature indicator, steam iron will be available, otherwise water may leak from the sole-plate.It indicates that the temperature has been ready until the indicator light goes off.Set the steam regulator correctly, increase the steam output by rotating the steam regulator anti-clockwise, otherwise decrease.
Caution: Synthetic Fabric, Nylon, Synthetic Silk and Silk cannot use the steam iron otherwise it will damage the finish of surface.
The Anti-drip feature prevents the dripping of water from the sole-plate. Even if the tank is entirely full, there will be no spilling of water from the steam. Neither, will the water droplets be leaking from any corner of the steam iron. With a bimetal assembled inside the iron, which can close the steam when the iron sole-plate becomes very low, so water leakage will never happen with this features.
Caution: If the fabric consists of various kinds of fibers, always select the lowest ironing temperature of the composition of those fibers.
This amazing iron from Warmex comes with three impressive functions that make it quite utilitarian. You can choose between its dry, spray and steam functions according to the fabric that needs pressing. can be used for dry ironing.
Easy Grip Handle
The handle of this model is ergonomically designed for enhanced grip. Ergonomic handle that enhances the overall convenience of using this iron.
There will be continuous steam for a certain period post which the iron will stay warm. The iron produces continuous steam (up to 30 g/minute) providing additional steam for stubborn wrinkles.
The spray of water tends to relax the fabric being ironed and assists in removing wrinkles from the garment. The water spray feature helps to take out stubborn creases and give your clothes a better feel and smoothens your clothes effortlessly. The water can be filled from the front end and can be sprayed when ironing.
Filling With Water
Set the steam regulator to O (=no steam) (only for steam iron).
Hold the iron by hand and slant the iron with 45° down, open Water Filling Cover if any.
Fill the water in the box through Water-Filling Hole.
If the water is too hard, it is advisable to use distilled water.
Do not put the chemically decaled water in the water reservoir.
Wipe off the water over the box, pour out the remaining water after use.
1 Years Warranty & 3 MONTHS ADDITIONAL WARRANTY ON REGISTRATION
DRY/ SPRAY/STEAM/ 110 GRAMS BURST OF STEAM SHOT, SELF CLEANING ,360° SWIVEL CORD , THERMOSTAT CUT-OFF, ANTI DRIP
To Prevent Water Leakage, keep the iron horizontal when not in use, do not fill water completely, leave some gap and wait for some time for the iron to heat up before using the iron,Easy and super fast filling of the watertank,
TECHNICAL SPECIFICATION: Wattage: 2200 W, Voltage: 230 Volts 50 Hz AC Only , Continuous Steam Ironing/ Continuous Verticle Steam Ironing, Easy and super fast emptying of the watertank,A fine spray evenly moistens the Cotton